Your Vehicle: 1975 GMC G15 Click here to choose a new vehicle
This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit

Disc Brake Caliper Bushing - Acdelco Gold/professional Brakes - BUSHING,RR BRK CLPR BOLT INR (Part Number: 18K1525)

  • Price:   $  2.95

  • Availability: In Stock

Fits your vehicle.

  • CTO: CN
  • CTP: US
  • Harmonized Tariff Code (HTS): 8708995500
  • Life Cycle Status Code: 4
  • Life Cycle Status Description: Announced
  • Maximum Cases per Pallet Layer: 12
  • Pallet Layer Maximum: 5
  • Warranty Special: 24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details.
  • Warranty Special UOM: TX
  • Boot Included: No
  • Good Maintenance Practices - Section 1 - Bullet 4: Check the thickness of your brake pads.
  • Good Maintenance Practices - Section 2 - Bullet 4: Parking brake adjustments (as needed).
  • Signs of Wear & Troubleshooting - Section 1 - Bullet 4: A low or sinking brake pedal.
  • Signs of Wear & Troubleshooting - Section 1 - Bullet 6: Vehicle pulls to the left or right when brakes are applied.
  • Good Maintenance Practices - Section 2 - Bullet 2: Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
  • Good Maintenance Practices - Section 2 - Bullet 3: Inspection of wheel bearings and grease seals.
  • Programming Required: No
  • Length: 3.56 IN
  • Good Maintenance Practices - Section 1 - Header: The following inspections and maintenance procedures can help prevent potential brake problems:
  • Signs of Wear & Troubleshooting - Section 1 - Bullet 3: Difficulty stopping the vehicle.
  • Height: 1.44 IN
  • Good Maintenance Practices - Section 1 - Bullet 1: Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
  • Lubricant Included: No
  • Good Maintenance Practices - Section 2 - Bullet 1: Inspection of the brake hoses for brittleness or cracking.
  • AAIA Part Type Description: Disc Brake Caliper Bushing
  • Extended Product Description: Rear Outer Disc Brake Caliper Rubber Bushing Kit with Boots
  • Signs of Wear & Troubleshooting - Section 1 - Bullet 1: Visible ridges on rotor surface.
  • Signs of Wear & Troubleshooting - Section 1 - Header: Brake rotor signs of wear include:
  • Measurements: 13 X 2 1/2 in
  • Good Maintenance Practices - Section 1 - Bullet 3: Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
  • Width: 1.63 IN
  • Good Maintenance Practices - Section 1 - Bullet 2: Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
  • Color: Brown
  • Meets or Exceeds Original Equipment Manufacture Specifications: Yes
  • Good Maintenance Practices - Section 2 - Header: The following should be conducted by a qualified technician:
  • Weight: 0.1 LB
  • Signs of Wear & Troubleshooting - Section 1 - Bullet 5: Brake pedal pulsation (not to be confused with normal ABS operation).
  • Material: Rubber
  • Signs of Wear & Troubleshooting - Section 1 - Bullet 2: Chirping, grinding, or squeaking noises when braking.
  • Key Search Words: caliperloaded-caliperbrake-caliperbreak-claiperbrake-jobfront-brakerear-brakecyliderhydraluiccaliparcallypordot-3dot-4front-brakesrear-brakesbrake-setbrake-caliper-sliderbanjo-boltbreakbushingcaliper-rebuild-kit
  • Application Summary: BuickCadillacCheckerChevroletGMCIsuzuJeepOldsmobilePontiac

Product Details

Manufacturer:
Acdelco Gold/professional Brakes
Part Number:
18K1525
Manufacturer Part Number:
18K1525
Description:
Disc Brake Caliper Bushing
Long Description:
BUSHING,RR BRK CLPR BOLT INR
Part Type:
Disc Brake Caliper Bushing
Category:
Brake
Subcategory:
Bushings
Sales Rank:

Technical Details

Condition:
New
Product Fit:
Direct Fit
Weight:
0.1 lbs.
Height:
1.44"
Width:
1.63"
Length:
1.63"
UOM:
EA
Quantity Sold:
Sold individually
Qty Per Application:
1
Minimum Order Qty:
1
Position:
Front Outer

Specifications

CTO
CN
CTP
US
Harmonized Tariff Code (HTS)
8708995500
Life Cycle Status Code
4
Life Cycle Status Description
Announced
Maximum Cases per Pallet Layer
12
Pallet Layer Maximum
5
Warranty Special
24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details.
Warranty Special UOM
TX
Boot Included
No
Good Maintenance Practices - Section 1 - Bullet 4
Check the thickness of your brake pads.
Good Maintenance Practices - Section 2 - Bullet 4
Parking brake adjustments (as needed).
Signs of Wear & Troubleshooting - Section 1 - Bullet 4
A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - Bullet 6
Vehicle pulls to the left or right when brakes are applied.
Good Maintenance Practices - Section 2 - Bullet 2
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3
Inspection of wheel bearings and grease seals.
Programming Required
No
Length
3.56 IN
Good Maintenance Practices - Section 1 - Header
The following inspections and maintenance procedures can help prevent potential brake problems:
Signs of Wear & Troubleshooting - Section 1 - Bullet 3
Difficulty stopping the vehicle.
Height
1.44 IN
Good Maintenance Practices - Section 1 - Bullet 1
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Lubricant Included
No
Good Maintenance Practices - Section 2 - Bullet 1
Inspection of the brake hoses for brittleness or cracking.
AAIA Part Type Description
Disc Brake Caliper Bushing
Extended Product Description
Rear Outer Disc Brake Caliper Rubber Bushing Kit with Boots
Signs of Wear & Troubleshooting - Section 1 - Bullet 1
Visible ridges on rotor surface.
Signs of Wear & Troubleshooting - Section 1 - Header
Brake rotor signs of wear include:
Measurements
13 X 2 1/2 in
Good Maintenance Practices - Section 1 - Bullet 3
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Width
1.63 IN
Good Maintenance Practices - Section 1 - Bullet 2
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Color
Brown
Meets or Exceeds Original Equipment Manufacture Specifications
Yes
Good Maintenance Practices - Section 2 - Header
The following should be conducted by a qualified technician:
Weight
0.1 LB
Signs of Wear & Troubleshooting - Section 1 - Bullet 5
Brake pedal pulsation (not to be confused with normal ABS operation).
Material
Rubber
Signs of Wear & Troubleshooting - Section 1 - Bullet 2
Chirping, grinding, or squeaking noises when braking.
Key Search Words
caliperloaded-caliperbrake-caliperbreak-claiperbrake-jobfront-brakerear-brakecyliderhydraluiccaliparcallypordot-3dot-4front-brakesrear-brakesbrake-setbrake-caliper-sliderbanjo-boltbreakbushingcaliper-rebuild-kit
Application Summary
BuickCadillacCheckerChevroletGMCIsuzuJeepOldsmobilePontiac

The ACDELCO GOLD/PROFESSIONAL BRAKES Disc Brake Caliper Bushing contains no remanufactured components, and is designed to operate in either city or highway driving.

Year Make Model Engine Notes
1975GMCG154.1L[] Front Outer; ; Quantity needed per vehicle: 1
1975GMCG155.7L[] Front Outer; ; Quantity needed per vehicle: 1
1975GMCG155.7L[] Front Outer; ; Quantity needed per vehicle: 1

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 12MTH / 12K MILES from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable. 

  1. All items are given a limited 12MTH / 12K MILES warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer. 
  2. Under NO circumstances will our liability exceed the amount of the original sale.
  3. Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
  4. The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
  5. All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted. 
  6. Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer. 


Can't find what you are looking for? Try searching by one of these methods below.