To make sure this part does fit your vehicle Check The Fit
Hvac Heater Hose - Gates - Premium Molded Heater Hose (Part Number: 12115)
- Manufacturer:
- Gates
- Part Number:
- 12115
- Manufacturer Part Number:
- 12115
- Description:
- Hvac Heater Hose
- Long Description:
- Premium Molded Heater Hose
- Part Type:
- Hvac Heater Hose
- Category:
- Hvac
- Subcategory:
- Hoses And Pipes
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 0.603 lbs.
- Height:
- 2.417"
- Width:
- 5.128"
- Length:
- 5.128"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 770075677826
Technical Details
- Centerline Length
- 437 MM
- Molded
- Yes
- Number of Quick Connect Fittings
- 0
- End 2 Inside Diameter
- 16 MM
- Material
- EPDM
- End 1 Inside Diameter
- 16 MM
- End 2 Inside Diameter
- .62 IN
- Centerline Length
- 17.22 IN
- End 1 Inside Diameter
- .62 IN
- CTO
- US
- Harmonized Tariff Code (Schedule B)
- 4009310000
- Life Cycle Status Code
- 4
- SDR Required Flag
- N
- Taxable
- Y
- Marketing Description
- <p>Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.</p><ul><li>Similar to OEM specifications.</li><li>Has all the quality features of Gates Molded Coolant Hose.</li><li>Engineered to resist electrochemical degradation - the leading cause of hose failure.</li><li>Inside diameters range from 1/4\" to 1\".</li><li>Meets SAE 20R3 type EC Class D-1 and D-2 specifications.</li></ul><p>Temperature rating: -40Deg F to 275Deg F (-40Deg C to 135Deg C) in coolant hose applications.</p><p><b>Note</b>: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.</p><p><b>Gates - Driven By Possibility</b></p>
- Short Product Description
- Heater Hose
- Abbreviated Product Description
- Hose
- Application Summary
- 2015-14 Lexus, ES350, V-6 3.5 L, Heater Inlet
- TLE
- Premium Molded Heater Hose
- Product Description - Invoice
- Molded Heater Hose
Specifications
The GATES Hvac Heater Hose contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2015 | Lexus | ES350 | 3.5L | [Molded Heater Hose] Heater Inlet; GAS; Quantity needed per vehicle: 1 |
| 2014 | Lexus | ES350 | 3.5L | [Molded Heater Hose] Heater Inlet; GAS; Quantity needed per vehicle: 1 |
Warranty Information |
|
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages. For other parts, we provide a limited warranty of 12MTH / 12K MILES from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
|