Drum Brake Wheel Cylinder - Acdelco Gold/professional Brakes - Rear Passenger Side Brake Wheel Cylinder (Part Number: 18E406)

  • Price:   $  93.95

  • Availability: In Stock

Check The Fit

  • Signs of Wear & Troubleshooting - Section 1 - Bullet 4: A low or sinking brake pedal.
  • Good Maintenance Practices - Section 2 - Bullet 3: Inspection of wheel bearings and grease seals.
  • Casting Material: Cast Iron
  • Mount Hole Quantity: 4
  • Good Maintenance Practices - Section 2 - Bullet 4: Parking brake adjustments (as needed).
  • Mounting Hardware Included: No
  • Good Maintenance Practices - Section 1 - Bullet 1: Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
  • Height: 3 IN
  • Good Maintenance Practices - Section 1 - Bullet 3: Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
  • Meets or Exceeds Original Equipment Manufacture Specifications: Yes
  • Programming Required: No
  • Signs of Wear & Troubleshooting - Section 1 - Bullet 2: Fluid spots beneath the car, indicating there may be a leak within the cylinder.
  • Attachment Type: Bolted
  • Brake Line Inlet Thread Diameter: 0.393 IN
  • Brake Line Inlet Thread Diameter: 10 MM
  • Signs of Wear & Troubleshooting - Section 1 - Bullet 1: Brake warning light is on.
  • Good Maintenance Practices - Section 1 - Bullet 2: Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
  • Weight: 2.54 LB
  • Signs of Wear & Troubleshooting - Section 1 - Bullet 3: Difficulty stopping the vehicle.
  • Width: 3.8 IN
  • Bleeder Screw Cap Included: Yes
  • Good Maintenance Practices - Section 1 - Header: The following inspections and maintenance procedures can help prevent potential brake problems:
  • Bleeder Screw Included: Yes
  • Signs of Wear & Troubleshooting - Section 1 - Header: Brake cylinder signs of wear include:
  • Bore Diameter: 26.9875 MM
  • Bore Diameter: 1.0625 IN
  • Good Maintenance Practices - Section 2 - Bullet 2: Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
  • Extended Product Description: Rear Passenger Side Drum Brake Wheel Cylinder
  • AAIA Part Type Description: Drum Brake Wheel Cylinder
  • Application Summary: ChevroletGMCIsuzu
  • Key Search Words: wheel-cylinderbrake-cylinderdrum-brakesrear-drum-hydraulic-cylinderbrake-clyinderwheel-clyinderrear-brake-clyinderdrum-brake-clyinderrear-wheel-cylinderrear-wheel-clyinder
  • CTO: JP
  • CTP: CN
  • Harmonized Tariff Code (HTS): 8413919060
  • Life Cycle Status Code: 4
  • Life Cycle Status Description: Announced
  • Maximum Cases per Pallet Layer: 12
  • Pallet Layer Maximum: 5
  • Warranty Special: 24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details.
  • Warranty Special UOM: TX
  • Good Maintenance Practices - Section 1 - Bullet 4: Check the thickness of your brake pads.
  • Good Maintenance Practices - Section 2 - Bullet 1: Inspection of the brake hoses for brittleness or cracking.
  • Cylinder Bore Diameter: 1.063 IN
  • Length: 5.6 IN
  • Good Maintenance Practices - Section 2 - Header: The following should be conducted by a qualified technician:

Product Details

Manufacturer:
Acdelco Gold/professional Brakes
Part Number:
18E406
Manufacturer Part Number:
18E406
Description:
Drum Brake Wheel Cylinder
Long Description:
Rear Passenger Side Brake Wheel Cylinder
Part Type:
Drum Brake Wheel Cylinder
Category:
Brake
Subcategory:
Brake Hydraulics
Sales Rank:

Technical Details

Weight:
2.54 lbs.
Height:
3"
Width:
3.8"
Length:
3.8"
UOM:
EA
Quantity Sold:
Sold individually
Minimum Order Qty:
1

Specifications

Signs of Wear & Troubleshooting - Section 1 - Bullet 4
A low or sinking brake pedal.
Good Maintenance Practices - Section 2 - Bullet 3
Inspection of wheel bearings and grease seals.
Casting Material
Cast Iron
Mount Hole Quantity
4
Good Maintenance Practices - Section 2 - Bullet 4
Parking brake adjustments (as needed).
Mounting Hardware Included
No
Good Maintenance Practices - Section 1 - Bullet 1
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Height
3 IN
Good Maintenance Practices - Section 1 - Bullet 3
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Meets or Exceeds Original Equipment Manufacture Specifications
Yes
Programming Required
No
Signs of Wear & Troubleshooting - Section 1 - Bullet 2
Fluid spots beneath the car, indicating there may be a leak within the cylinder.
Attachment Type
Bolted
Brake Line Inlet Thread Diameter
0.393 IN
Brake Line Inlet Thread Diameter
10 MM
Signs of Wear & Troubleshooting - Section 1 - Bullet 1
Brake warning light is on.
Good Maintenance Practices - Section 1 - Bullet 2
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Weight
2.54 LB
Signs of Wear & Troubleshooting - Section 1 - Bullet 3
Difficulty stopping the vehicle.
Width
3.8 IN
Bleeder Screw Cap Included
Yes
Good Maintenance Practices - Section 1 - Header
The following inspections and maintenance procedures can help prevent potential brake problems:
Bleeder Screw Included
Yes
Signs of Wear & Troubleshooting - Section 1 - Header
Brake cylinder signs of wear include:
Bore Diameter
26.9875 MM
Bore Diameter
1.0625 IN
Good Maintenance Practices - Section 2 - Bullet 2
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Extended Product Description
Rear Passenger Side Drum Brake Wheel Cylinder
AAIA Part Type Description
Drum Brake Wheel Cylinder
Application Summary
ChevroletGMCIsuzu
Key Search Words
wheel-cylinderbrake-cylinderdrum-brakesrear-drum-hydraulic-cylinderbrake-clyinderwheel-clyinderrear-brake-clyinderdrum-brake-clyinderrear-wheel-cylinderrear-wheel-clyinder
CTO
JP
CTP
CN
Harmonized Tariff Code (HTS)
8413919060
Life Cycle Status Code
4
Life Cycle Status Description
Announced
Maximum Cases per Pallet Layer
12
Pallet Layer Maximum
5
Warranty Special
24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details.
Warranty Special UOM
TX
Good Maintenance Practices - Section 1 - Bullet 4
Check the thickness of your brake pads.
Good Maintenance Practices - Section 2 - Bullet 1
Inspection of the brake hoses for brittleness or cracking.
Cylinder Bore Diameter
1.063 IN
Length
5.6 IN
Good Maintenance Practices - Section 2 - Header
The following should be conducted by a qualified technician:

The ACDELCO GOLD/PROFESSIONAL BRAKES Drum Brake Wheel Cylinder contains no remanufactured components, and is designed to operate in either city or highway driving.

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 12MTH / 12K MILES from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable. 

  1. All items are given a limited 12MTH / 12K MILES warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer. 
  2. Under NO circumstances will our liability exceed the amount of the original sale.
  3. Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
  4. The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
  5. All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted. 
  6. Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer. 


Can't find what you are looking for? Try searching by one of these methods below.